关于 Grbl

Grbl is a free, open source, high performance software for controlling the motion of machines that move, that make things, or that make things move, and will run on a straight Arduino. If the maker movement was an industry, Grbl would be the industry standard.

Grbl 是一个免费,开源的,用于控制机器移动的高性能运动软件,让事物,或使物体运动,并将直接在 Arduino 上运行。如果创客运动是一个产业,那么 Grbl 将成为行业标准。

Most open source 3D printers have Grbl in their hearts. It has been adapted for use in hundreds of projects including laser cutters, automatic hand writers, hole drillers, graffiti painters and oddball drawing machines. Due to its performance, simplicity and frugal hardware requirements Grbl has grown into a little open source phenomenon.

大多数开源 3D 打印机是基于 Grbl 为核心。其已经适用于成百上千的项目包括激光切割机,自动手作家、钻孔机,涂鸦画家和怪异的绘图机。由于其高效,简单和极低的硬件要求 Grbl 已经成为一个小的开源事迹。

In 2009, Simen Svale Skogsrud graced the open-source community by writing and releasing the early versions of Grbl to everyone (inspired by the Arduino GCode Interpreter by Mike Ellery). Since 2011, Grbl is pushing ahead as a community-driven open-source project under the pragmatic leadership of Sungeun K. Jeon Ph.D.

2009 年,Simen Svale Skogsrud  受惠于开源社区的贡献编写并向所有人发布了 Grbl 的早期版本(灵感来自于 Mike Ellery 的 Arduino G 代码解释器)。2011 年以来,Grbl 在 Sungeun K. Jeon 博士务实的领导下作为一个社区驱动的开源项目在推进。